Anmol Chemicals is the pioneer manufacturers of Benzoyl Peroxide USP BP Ph Eur Grade, Pharmaceutical Excipients Fragrance Food & Flavor chemicals in India. We offer Halal and Kosher Benzyl alcohol made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Benzoyl Peroxide is in these pages. The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal Benzoyl Peroxide USP BP Ph Eur Grade Manufacturers
CAS Number: 94-36-0
Benzoyl PeroxideYOU ARE HERE: Benzoyl Peroxide USP BP Ph Eur Grade Manufacturers
Benzoyl Peroxide USP BP Ph Eur Grade SDS GHS, MSDS Sheet
Hydrous Benzoyl Peroxide USP Grade
C14H10O4 (anhydrous) --- 242.23
Peroxide, dibenzoyl.
Benzoyl peroxide CAS 94-36-0Hydrous Benzoyl Peroxide contains not less than 65.0 percent and not more than 82.0 percent of C14H10O4. It contains about 26 percent of water for the purpose of reducing flammability and shock sensitivity.
Caution:Hydrous Benzoyl Peroxide may explode at temperatures higher than 60C or cause fires in the presence of reducing substances. Store it in the original container, treated to reduce static charges.Identification:
A: Chromatograph Comparision to pass the test.
B: To pass the test.
Assay: Place about 300 mg of previously mixed Hydrous Benzoyl Peroxide in an accurately weighed conical flask fitted with a ground-glass stopper, and weigh again to obtain the weight of the test specimen. Add 30 mL of glacial acetic acid, previously sparged with carbon dioxide for not less than 2 minutes just before use, and swirl the flask gently to effect solution. Add 5 mL of potassium iodide solution (1 in 2), and mix. Allow the solution to stand for 1 minute. Titrate the liberated iodine with 0.1 N sodium thiosulfate. As the endpoint is approached add 1 drop of starch iodide paste, or equivalent, and continue the titration to the discharge of the blue color. Perform a blank determination, and make any necessary correction. Each mL of 0.1 N sodium thiosulfate is equivalent to 12.11 mg of C14H10O4.
Hydrous Benzoyl Peroxide BP Ph Eur Grade
C14H10O4 --- 242.2 --- CAS 94-36-0
Action and use: Used topically in the treatment of acne.DEFINITION
Content:
dibenzoyl peroxide : 70.0 per cent to 77.0 per cent;
water: minimum 20.0 per cent.CHARACTERS
Appearance: White or almost white, amorphous or granular powder.
Solubility: Practically insoluble in water, soluble in acetone, soluble in methylene chloride with the separation of water, slightly soluble in ethanol (96 per cent).
It loses water rapidly on exposure to air with a risk of explosion.
Mix the entire sample thoroughly before carrying out the following tests.IDENTIFICATION
First identification B.
Second identification A, C, D.
A. Ultraviolet and visible absorption spectrophotometry.
B. Infrared absorption spectrophotometry. Comparison Ph. Eur. reference spectrum of hydrous benzoyl peroxide.
C. Dissolve about 25 mg in 2 mL of acetone. Add 1 mL of a 10 g/L solution of diethylphenylenediamine sulfate and mix. A red colour develops which quickly darkens and becomes dark violet within 5 min.
D. To 1 g add 5 mL of ethanol (96 per cent), 5 mL of dilute sodium hydroxide solution and 10 mL of water. Boil the mixture under reflux for 20 min. Cool. The solution gives reaction of benzoates.TESTS
Acidity: Dissolve a quantity of the substance to be examined containing the equivalent of 1.0 g of dibenzoyl peroxide in 25 mL of acetone, add 75 mL of water and filter. Wash the residue with two quantities, each of 10 mL, of water. Combine the filtrate and the washings and add 0.25 mL of phenolphthalein solution. Not more than 1.25 mL of 0.1 M sodium hydroxide is required to change the colour of the indicator. Carry out a blank test.
Related substances: To pass the test.
Chlorides: Maximum 0.4 per cent.We also offer Benzyl Benzoate, Benzoic Acid and Benzoyl Peroxide
Benzoyl Peroxide USP BP Ph Eur Grade Manufacturers:
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264e-mail: anmolc@mtnl.net.in
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.
Copyright and Usual Disclaimer is Applicable 2 March, 2022